$949.00
$949.00
The Jaeger-LeCoultre Reverso Tribute Duoface Small Seconds Ref. Q3982590 is the rose gold member of the family, 47 x 28.3 mm and 9.613 mm thick on the genuine watch. Duoface means what the name says: the rectangular case carries a dial on each side and pivots in its cradle, so the face that lay against the wrist becomes the one read. This JLC Reverso replica follows that rose gold reference, with a blue sunray dial, applied gold baton markers, a thin gold track around the perimeter, small seconds at six, gold hands and a blue smooth leather strap.
Only one dial is visible at a time. The blue sunray side is what the front photographs show; the second dial sits on the back of the same case and appears once it is swung out of its cradle and turned. Nothing is pressed or pulled to change the reading: the case itself is the switch, and on a Tier 1 build it seats with a clean click. A reverse dial missing from frontal shots is simply how a two-sided Reverso photographs.
Movement: clone Cal. 854A/2, manual-wind, 21,600 vph (genuine Cal. 854A/2: manual-wind, 21,600 vph, 19 jewels, shaped, 3.8 mm thick). The caliber in this JLC Reverso super clone copies the genuine shaped layout instead of dropping a round movement into a rectangle: a case 28.3 mm wide leaves no room for a round plate, and the small seconds would not land exactly at six. One mainspring feeds both faces, the reverse dial taking its drive through the second-dial module geared off the same train, so one winding keeps two displays running. Two faces sharing one budget is why the reserve here is 40 hours against the genuine 42. A cheap build of this reference goes the other way: a Chinese quartz or a DG2813 behind the dial, and a case 11-13 mm thick instead of the half millimetre a Tier 1 case holds against the genuine 9.613 mm.
Duoface and single-dial Tributes differ in thickness, reserve and price rather than in styling, and both branches are laid out in the JLC Reverso catalogue. If the question is whether a second face is the best use of the money, the JLC clone ranking in full answers it against everything else the brand makes.
A second dial earns its millimetres if two readings from one watch is something the wrist will use. The one-sided Reverso Tribute Small Seconds in this catalogue answers the opposite case: genuine 45.6 x 27.4 mm, 8.5 mm thick, hand-wound Cal. 822/2 rated 42 hours, and a clone of that same caliber, manual-wind at 21,600 vph and quoted at 40 hours, with nothing on the back but metal. It sits over a millimetre flatter, and one winding serves one face. The Q3982590 trades two hours of reserve for the dial no photograph shows.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$299.00 – $949.00Price range: $299.00 through $949.00
We have 500+ models not shown on website. Message us!
Order preparation & inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.