$559.00
$559.00
This replica Ballon Bleu SBB0015 black puts a 42mm stainless steel case on your wrist, making it one of the larger entries in the Ballon Bleu family. The WSBB0015 reference uses a black lacquered dial with silver Roman numeral hour markers and a date aperture at 3 o’clock. A fluted crown set with a synthetic spinel cabochon sits recessed into the right side of the case, following the signature Ballon Bleu design language where the crown merges into the case profile rather than protruding outward. At 42mm this version targets those who prefer a bolder wrist presence compared to the 36mm and 33mm variants.
The black dial creates stronger contrast against the silver-toned numerals than lighter variants, giving the watch a more defined look in direct sunlight. The sword-shaped hands in blued steel remain a Ballon Bleu signature across all references.
Inside sits an automatic movement handling hours, minutes, running seconds, and a quickset date. The rotor keeps the movement wound through daily wear, and you should expect consistent timekeeping within standard mechanical tolerances. The 42mm case provides enough internal volume for a reliable power reserve. Compared to the rose gold WGBB0030 version, this full-steel reference keeps the weight balanced and the visual profile more understated. Both sit within the Ballon Bleu collection, but the black dial here reads as more contemporary against the classical silver variant.
At 42mm, the SBB0015 occupies the top of the Ballon Bleu size range. It shares the same rounded case architecture and integrated crown as every other Ballon Bleu, but the larger diameter and black dial shift it from elegant dress piece toward a versatile daily watch. The steel bracelet with folding clasp sits flat against the wrist without excessive overhang on most wrist sizes above 17cm. If you want the Ballon Bleu design language in a size that reads confidently on a larger wrist, this replica Ballon Bleu SBB0015 black delivers exactly that proportion.
Genuine Cartier Ballon Bleu WSBB0015: $8,200 MSRP
Premium Replica: $559
The 42mm black dial WSBB0015 is the largest standard Ballon Bleu — maximum presence in Cartier’s iconic round case. Black dial creates bold contrast with polished steel and blued hands. Our replica delivers this statement-making configuration at accessible price point.
42mm pushes dress watch boundaries but remains elegant due to Ballon Bleu’s refined proportions — thin bezel, integrated crown, and polished surfaces. It suits wrists 7″ and larger naturally. For wrists 6.5-7″, it wears as bold statement rather than subtle accent. Under 6.5″, consider 40mm.
Black dial provides excellent contrast with white Roman numerals and blued hands — legibility is actually superior to silver dial in most lighting. The black also highlights the polished chapter ring and creates more visual depth. It’s arguably the most readable Ballon Bleu dial option.
The WSBB0015 is time-only — no date window interrupts the clean dial symmetry. Cartier chose to prioritize aesthetic purity in this reference. If you require date function, some Ballon Bleu Chronograph variants include it, though they change the dial layout significantly.
For 42mm in rose gold, see WGBB0017. Compare W69016Z4 in two-tone. For smaller sizing, explore 40mm WSBB0060. Browse all Ballon Bleu.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$299.00 – $999.00Price range: $299.00 through $999.00
$645.00 – $1,499.00Price range: $645.00 through $1,499.00
$2,799.00 Original price was: $2,799.00.$1,799.00Current price is: $1,799.00.
$399.00 – $430.00Price range: $399.00 through $430.00
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.