$676.00 – $1,499.00Price range: $676.00 through $1,499.00
$676.00 – $1,499.00Price range: $676.00 through $1,499.00
Finished in white ceramic with a white lip accent on the dial, this replica richard-mille ceramic rendition of the RM 007-1 presents the tonneau silhouette in its lightest possible configuration. The case measures approximately 45mm by 31mm, consistent with the reference’s compact ladies’ proportions. White ceramic provides the same scratch hardness as its black counterpart, rating around 1500 Vickers, while reflecting rather than absorbing ambient light. The white lip motif on the dial blends into the monochrome palette, creating a tone-on-tone effect that reads as understated from a distance and detailed up close.
White ceramic is produced by introducing additional oxide compounds during the sintering process. The result is a material that resists discoloration from UV exposure and skin contact.
The automatic movement inside the 007-1 handles basic timekeeping with hours, minutes, and a center seconds hand. The solid caseback protects the caliber while keeping the visual emphasis on the dial side. White ceramic cases demand precise finishing because any surface irregularity becomes visible against the bright material. The crown integrates into the case contour at 3 o’clock, maintaining the tonneau shape’s clean lines. For a bolder interpretation of the same lip motif, compare this with the 07-01 featuring rose gold and diamond accents, which layers additional materials over the ceramic foundation. Both sit within the complete Richard Mille collection and share the ladies-focused sizing.
Against the black ceramic or red-lip versions, the all-white 007-1 occupies the quietest position in the range. It does not compete for attention and works as an everyday piece that matches virtually any outfit. The tone-on-tone lip detail rewards closer inspection without shouting from across a room. On the wrist, the low weight of ceramic makes full-day wear effortless. This replica richard-mille ceramic edition appeals to buyers who value the tonneau form factor in its most refined, minimal expression.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$749.00 – $949.00Price range: $749.00 through $949.00
$647.00 – $1,799.00Price range: $647.00 through $1,799.00
$652.00 – $1,499.00Price range: $652.00 through $1,499.00
$638.00 – $1,499.00Price range: $638.00 through $1,499.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.