$749.00
$749.00
The superclone Speedmaster Reverse Panda 42.50.01.004 flips the classic Moonwatch color scheme—white dial with black subdials instead of the traditional black-on-black. Reference 310.30.42.50.01.004 represents Omegas modern interpretation of vintage “panda” chronograph aesthetics, and this OM Factory replica captures the high-contrast design that made reverse panda dials a collector favorite. The configuration creates maximum legibility while maintaining the Speedmaster Professional silhouette unchanged since the Apollo era.
Standard Speedmaster Moonwatch models use black dials with matching black subdials—functional but low contrast. The Speedmaster Reverse Panda inverts this relationship: white main dial, black subdial registers. This creates dramatic visual separation between chronograph functions, with the 30-minute and 12-hour counters reading instantly against the light background. OM Factory replicates the specific white tone Omega uses—not bright white, but a slightly warm silver-white that photographs authentically.
The 42mm stainless steel case follows the asymmetric Moonwatch Professional template with integrated crown guards. What distinguishes reference 42.50.01.004 is the dial treatment: applied black indices on white ground, black hands with luminous fill, and three recessed black subdials creating the signature panda pattern. The black ceramic bezel with white tachymeter scale completes the inverted aesthetic. This superclone Speedmaster variant appeals to buyers wanting Moonwatch heritage with higher visual impact.
OM Factory dominates Speedmaster clone production, and their Reverse Panda 42.50.01.004 shows why. The white dial requires precise finishing—any inconsistency shows immediately against the light background. OM achieves the correct tone and texture, with subdial rings sharply defined against the main dial surface. Bracelet, clasp, and caseback execution match their standard Moonwatch quality. For the replica Speedmaster panda dial segment, this remains the benchmark.
Choosing between reverse panda and standard black dial comes down to wrist presence versus versatility. The white dial configuration creates more contrast and draws attention; black dials blend more easily across situations. Both share identical case dimensions, movement, and bracelet—only the dial aesthetic differs. Collectors often own both variants for different contexts. The standard Professional handles daily wear; the Reverse Panda makes statements.
Reverse panda refers to white main dial with black subdials—the opposite of standard panda (black dial, white subdials). Reference 310.30.42.50.01.004 uses this high-contrast configuration for maximum chronograph legibility.
OM Factory produces the most accurate superclone of this reference. Their white dial finishing and black subdial execution match genuine specifications closely.
Yes. The stainless steel construction and 50m water resistance handle normal daily activities. White dials show dirt more readily than black, requiring occasional cleaning.
Clone of Omega caliber 3861 manual-wind chronograph with approximately 50 hours power reserve and decorated finish visible through exhibition caseback.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$650.00 – $1,799.00Price range: $650.00 through $1,799.00
$644.00 – $1,499.00Price range: $644.00 through $1,499.00
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.