$949.00
$949.00
At 38mm, this replica complications 4948R0 gold brings the annual calendar and moon phase combination into a ladies’ format with diamond-set bezel and lugs. The Patek Philippe 4948R-001 uses rose gold throughout, paired with a gold-toned dial that matches the warmth of the case metal. Where most complicated watches in the catalog target men, the 4948R was designed from the ground up for smaller wrists without sacrificing mechanical sophistication.
The 38mm case size puts the 4948R in a middle ground. Large enough to display all calendar apertures without crowding, yet proportioned for wrists that find 40mm references too dominant. Patek reserved diamond setting for the bezel and lugs, leaving the dial itself clean and focused on the calendar functions.
Rose gold and diamonds are common enough in ladies’ watches, but rose gold paired with a working annual calendar mechanism is not. The 4948R includes the same type of calendar module found in the men’s 5205 and 5396 references, miniaturized to fit the smaller case. Moon phase accuracy on these calibers is rated to one day of deviation per 122 years. The gold dial reflects light with a soft glow rather than a sharp mirror finish, which helps the applied indices stand out. Compare the 4948R against the 5205G in blue from the same Complications collection to see how the annual calendar format scales between genders.
The 4948R addresses a specific gap: a mechanically serious watch in a traditionally feminine package. The diamonds add a jewelry dimension without overwhelming the calendar complication, and the 38mm diameter works on most wrists without looking oversized. If your interest in horology extends beyond quartz-driven jewelry watches, this replica complications 4948R0 gold makes a strong case for complications at a wearable size.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$651.00 – $1,499.00Price range: $651.00 through $1,499.00
$299.00 – $949.00Price range: $299.00 through $949.00
$249.00 – $949.00Price range: $249.00 through $949.00
$299.00 – $899.00Price range: $299.00 through $899.00
$249.00 – $949.00Price range: $249.00 through $949.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.