$949.00
$949.00
This replica GMT-Master 116713 pairs a black dial with a two-tone construction that blends stainless steel and yellow gold across the case, bracelet, and bezel. At 40mm, the 116713 follows the standard GMT-Master II case dimensions, but the mixed-metal execution shifts the visual register from pure tool watch toward something that works equally well with a sport coat. The black ceramic bezel insert carries the 24-hour numerals in gold lettering, creating a contrast that reads clearly at any angle.
The yellow gold center links on the Oyster bracelet align with the gold crown, crown guards, and bezel font to create a cohesive warm accent throughout the watch.
Two-tone GMT-Master references occupy a specific space in the lineup. They carry the same dual-timezone functionality as full-steel versions but add the visual weight of precious metal that transforms the wearing context. The polished gold center links alternate with brushed steel outer links on the bracelet, producing a texture pattern visible even under low light. Rolex positioned the 116713 as the entry into gold GMT-Masters, below the full yellow-gold 116718 series. For a completely different approach to the green-and-gold palette, see the Absinthe 126729VTNR on Jubilee. The full range of options sits within the GMT-Master collection, where two-tone and full-metal variants share shelf space.
The added density of gold mid-links gives the 116713 a wrist presence that full-steel references lack. You feel the difference immediately when clasping the bracelet. The black dial keeps legibility high against the warm metal accents, and the ceramic bezel resists scratching from daily contact far better than earlier aluminum inserts. For anyone stepping up from a monochrome steel GMT-Master, this replica GMT-Master 116713 delivers the two-tone look with full GMT functionality intact.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$657.00 – $1,499.00Price range: $657.00 through $1,499.00
$249.00 – $849.00Price range: $249.00 through $849.00
$559.00 Original price was: $559.00.$459.00Current price is: $459.00.
$687.00 – $1,499.00Price range: $687.00 through $1,499.00
$349.00 – $949.00Price range: $349.00 through $949.00
$618.00 – $1,499.00Price range: $618.00 through $1,499.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.