$641.00 – $1,499.00Price range: $641.00 through $1,499.00
$641.00 – $1,499.00Price range: $641.00 through $1,499.00
KV Factory V3 produced this replica rm-35-02 white carbon with a full carbon fiber case and a white rubber strap, creating a material-consistent aesthetic from bezel to buckle. The 49.94 x 44.50mm tonneau silhouette is standard RM-35-02, but the V3 designation indicates refinements to case finishing and movement decoration compared to earlier KV iterations. Carbon fiber cases on Richard Mille watches achieve a strength-to-weight ratio that metal alternatives cannot match, and the matte texture varies from piece to piece because of how the composite layers are compressed during production.
The V3 iteration from KV Factory addresses finishing details on the case edges and bezel screw seating. Carbon fiber layering on the case sides shows the characteristic striped pattern where composite sheets overlap.
Through the skeleton dial, the movement plate and bridges remain fully visible. The automatic rotor winds the mainspring without manual intervention, and the open-worked layout lets you follow the gear train from barrel to escapement. For context on how different factories approach this reference, compare against the carbon fiber skeleton dial version to see alternative finishing choices. The broader RM-35-02 collection includes both ZF and KV options, each with distinct case texture and movement decoration philosophies.
KV Factory V3 versions of the RM-35-02 tend to show more defined carbon fiber layering on the case flanks. The white strap and carbon case combination creates a tonal pairing that stays coherent, with both materials sharing a matte surface finish. On the wrist, the overall look is technical and purposeful without the high-contrast punch of colored rubber options. This replica rm-35-02 white carbon presents the carbon fiber architecture as the primary visual element rather than letting a bold strap color dominate attention.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$249.00 – $949.00Price range: $249.00 through $949.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.