$639.00 – $1,499.00Price range: $639.00 through $1,499.00
$639.00 – $1,499.00Price range: $639.00 through $1,499.00
This replica rm-055 red ceramic combines a ceramic case with a red rubber strap, creating one of the more vivid configurations available in the RM-055 range. The red strap against the dark ceramic case produces a contrast that echoes Richard Mille’s longstanding connection to motorsport, where red accents signal performance intent. The tonneau case measures 49.9 x 42.7mm and maintains the same ergonomic curve on the underside that defines the 055 platform across all its material variants.
The ceramic case construction provides scratch resistance that outlasts both steel and titanium under normal wearing conditions. The dark ceramic surface absorbs light rather than reflecting it, which makes the red strap the clear focal point of the overall design.
The automatic movement delivers hours and minutes with no additional complications, consistent with the RM-055 approach of functional minimalism. Visible through the sapphire caseback, the movement architecture reveals the rotor, mainspring barrel, and balance wheel assembly. This transparency on the rear side compensates for any opacity on the dial side, giving the wearer a mechanical view regardless of the front dial treatment. The V2 skeleton dial reference takes transparency further by opening the front as well, but this version concentrates the visual drama on the red strap and dark ceramic contrast instead. Both are part of the RM-055 range.
Red strap versions in the RM catalog carry a motorsport association that dates back to Richard Mille’s partnerships with F1 teams and racing drivers. The combination of dark ceramic and red rubber creates a deliberate two-tone effect that reads as intentional and designed rather than accessorized after the fact. This replica rm-055 red ceramic brings that racing-inspired aesthetic to the wrist for collectors drawn to the bolder side of the RM-055 spectrum.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$349.00 – $1,099.00Price range: $349.00 through $1,099.00
$2,799.00 Original price was: $2,799.00.$1,799.00Current price is: $1,799.00.
$679.00 – $1,499.00Price range: $679.00 through $1,499.00
$299.00 – $899.00Price range: $299.00 through $899.00
$650.00 – $1,499.00Price range: $650.00 through $1,499.00
$647.00 – $1,499.00Price range: $647.00 through $1,499.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.