This replica nautilus 571113 40mm brings the 5711-1300A-001 reference into diamond territory with yellow stones set across the bezel and dial. The base 5711 platform needs no introduction — it is arguably the most recognizable luxury sport watch reference in production history, designed by Gerald Genta in 1976. This version takes that iconic octagonal case and adds a full yellow diamond treatment that transforms the character from understated steel into something far more visually assertive. The 40mm case maintains the proportions that made the original famous while the diamond work adds layers of light reflection that the standard models cannot match.
The diamond setting follows the contours of the rounded octagonal bezel, with each stone individually secured. The yellow diamond selection adds warmth that pairs naturally with the steel case tones.
Iced-out Nautilus variants occupy a specific segment of the market. Patek Philippe offers factory-set diamond versions in its catalog, but aftermarket customization has pushed the concept further into bold configurations like this yellow diamond layout. The horizontal embossing on the dial — the signature Nautilus texture — remains visible between the stone settings, preserving the identity underneath the diamond work. For comparison, the brown dial iced-out version uses a darker palette that reads more conservative. Both sit within the broader Nautilus collection, which spans from clean time-only references to perpetual calendar complications.
Yellow diamonds push the visual volume higher than white or brown stone configurations on the same platform. The color temperature of yellow stones against polished steel creates a contrast that is immediately noticeable at arm’s length. Where a standard 5711/1A relies on the interplay of brushed and polished steel for its visual identity, this 5711-1300A leans entirely into sparkle and saturation. This replica nautilus 571113 40mm puts that yellow diamond Nautilus configuration on the wrist for those who want maximum presence from the Genta-designed platform.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$645.00 – $1,499.00Price range: $645.00 through $1,499.00
$652.00 – $1,499.00Price range: $652.00 through $1,499.00
$249.00 – $1,159.00Price range: $249.00 through $1,159.00
$637.00 – $1,499.00Price range: $637.00 through $1,499.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.