$1,249.00
$1,249.00
This replica Nautilus 711814 red brings the 7118/1452G-002 reference to life with a vivid ruby-toned diamond dial set inside a 35.2mm white gold case. The 7118 series represents Patek Philippe’s dedicated ladies Nautilus, and this particular variant pushes the design into full jewelry-watch territory. Red-set diamonds replace conventional hour markers, while a matching diamond bezel frames the horizontally embossed dial pattern that defines every Nautilus.
The 35.2mm sizing falls in the sweet spot for a ladies sports watch. It sits comfortably between purely decorative pieces and oversized unisex references, maintaining the Nautilus proportions Gerald Genta established in 1976 while scaling everything down for a smaller wrist.
Inside the 7118 series sits an automatic caliber based on the 324 SC architecture. This movement handles hours, minutes, seconds, and date through a center sweep hand and date aperture at 3 o’clock. The thin case profile depends on a low-height movement, and the 324 SC platform delivers that without sacrificing power reserve. Within the Nautilus lineup, the 7118 ladies references share this same caliber across all dial variants, so the mechanical heart stays consistent whether the exterior runs red, green, or blue diamonds. If green tones match your preference more closely, the 7118/1453G-003 green diamond version uses an identical case and movement in a cooler palette.
Among diamond Nautilus references, the 7118/1452G-002 occupies a distinct slot. The red tone gives it a warmer visual signature than the standard blue or white variants, making it the most visually assertive option in the ladies 7118 range. If you want a Nautilus that functions as both a technical sports watch and a statement piece, this replica Nautilus 711814 red delivers that combination in a 35.2mm package that stays proportional on the wrist.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$622.00 – $1,499.00Price range: $622.00 through $1,499.00
$657.00 – $1,499.00Price range: $657.00 through $1,499.00
$299.00 – $899.00Price range: $299.00 through $899.00
$249.00 – $949.00Price range: $249.00 through $949.00
$249.00 – $849.00Price range: $249.00 through $849.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.