$749.00
$749.00
The swiss clone Speedmaster Canopus Gold 42.50.02.001 represents the white gold option in Omegas precious metal Moonwatch lineup—full Canopus™ gold construction with silver dial creating the most understated of the gold variants. Reference 310.60.42.50.02.001 uses Omegas proprietary white gold alloy, named after one of the brightest stars visible from Earth. This OM Factory replica captures the distinctive silvery-white precious metal tone that sets Canopus apart from standard white gold.
Canopus gold is Omegas proprietary 18K white gold alloy, engineered to maintain its bright white appearance without the rhodium plating that standard white gold requires. Regular white gold gradually yellows as plating wears; Speedmaster Canopus Gold stays white permanently. OM Factory developed plating specifically matching this cool silver-white tone—noticeably brighter than standard white gold, distinctly different from steel. The 42.50.02.001 reference applies this alloy across all external components.
The silver sunburst dial complements the white gold case naturally—both share similar cool tones creating cohesive visual flow. Applied Canopus gold indices and hands add warmth against the silver ground without disrupting the overall cool palette. Three subdials at 3, 6, and 9 oclock use snailed finishing for depth. The stepped dial design references vintage Speedmaster configurations while maintaining modern proportions. This swiss clone Speedmaster white gold variant offers maximum elegance within the Moonwatch family.
Omega produces the Moonwatch Professional in three proprietary gold alloys: Canopus (white), Moonshine (yellow), and Sedna (rose). Canopus offers the most subtle precious metal presence—at a distance, it resembles steel until light catches the distinctive white gold finish. For buyers wanting gold Speedmaster without the visual impact of yellow or rose, Canopus provides that understated option.
White gold plating presents unique challenges: the tone must read as precious metal, not steel or silver. OM Factory achieves correct brightness and warmth balance on this replica Speedmaster Canopus—noticeably different from their steel Moonwatch clones. The plating extends uniformly across case, bracelet, crown, and pushers with no color variation at component junctions. For white gold Speedmaster collectors, this clone delivers the Canopus aesthetic at accessible pricing.
Canopus is Omegas proprietary 18K white gold alloy that maintains bright white color without rhodium plating. Unlike standard white gold that yellows over time, Canopus stays white permanently.
Canopus gold has a warmer, brighter appearance than stainless steel. The precious metal catches light differently and shows subtle color warmth absent in steel. Weight also differs—white gold is heavier than steel.
OM Factory produces the most accurate swiss clone of this reference. Their white gold plating matches Canopus tone closely—brighter than standard white gold alternatives.
Yes. The combination of white gold case and silver dial creates one of the dressiest Speedmaster configurations. The chronograph functions remain but the overall aesthetic leans formal.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$299.00 – $1,299.00Price range: $299.00 through $1,299.00
$621.00 – $1,499.00Price range: $621.00 through $1,499.00
$249.00 – $849.00Price range: $249.00 through $849.00
WhatsApp us
We have 500+ models not shown on website. Message us!
Order preparation
Chronological inspection
Swiss Premium Movement
Before shipping for approval
Express delivery (Tax Free)
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.