$749.00
$749.00
This replica Seamaster Worldtimer 220104 3001 brings one of Omega’s most technically ambitious Aqua Terra references to the wrist in full detail. The 220.10.43.22.03.001 pairs a worldtimer complication with the Aqua Terra’s signature teak-pattern dial, offering simultaneous reading of all 24 time zones through a city ring and a central 24-hour disc. At 43mm the case runs larger than the standard Aqua Terra, but the integrated bracelet and slim profile keep it balanced. The blue dial carries horizontal lines recalling a yacht’s wooden deck, a visual signature that sets the Aqua Terra apart from every other worldtimer on the market.
The world-time disc rotates once every 24 hours, aligning each city name with its current hour. Unlike a GMT function that tracks only two zones, this layout gives you every major time zone at a glance.
Inside sits an automatic movement driving the worldtimer module. The city disc and central 24-hour ring operate from the same gear train, keeping synchronization tight. Setting a new home city requires pulling the crown to position two and advancing the city ring. The omega aqua terra worldtimer mechanism holds a power reserve that supports daily wear without interruption. Compared to the Aqua Terra 150M 220.12.43 in the same size, the worldtimer adds a complication layer without adding noticeable case thickness. Both sit within the broader Seamaster lineup, yet they serve different travelers.
Most worldtimer watches push past 44mm and sit thick on the wrist. This reference keeps the profile closer to a standard three-hand dress watch, which makes it viable as a daily wearer rather than a travel-only piece. The teak-pattern dial in blue reads clearly under direct light and low light alike. If you need a single watch that covers meetings in London and calls to Tokyo without pulling out your phone, the 220.10.43.22.03.001 handles that without the bulk of a traditional worldtimer. This replica Seamaster Worldtimer 220104 3001 delivers practical multi-zone function in a case size that still fits under a shirt cuff.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$629.00 – $1,499.00Price range: $629.00 through $1,499.00
$648.00 – $1,499.00Price range: $648.00 through $1,499.00
$749.00 Original price was: $749.00.$559.00Current price is: $559.00.
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.