$749.00 Original price was: $749.00.$559.00Current price is: $559.00.
$749.00 Original price was: $749.00.$559.00Current price is: $559.00.
This replica Seamaster 210904 1003 uses a titanium-and-ceramic combination that sets it apart from the predominantly steel entries in the Seamaster Diver 300M range. The 210.90.42.20.01.003 reference pairs a sandblasted titanium case with a black ceramic dial and bezel, dropping the overall weight noticeably compared to its stainless steel siblings. Omega introduced this configuration to offer a tool-watch feel without the heft, and the matte surface treatment across the case gives it a distinctly tactical appearance that brushed steel cannot match.
The titanium case absorbs light differently than polished steel, producing a flat grey tone that stays consistent under changing lighting. The ceramic bezel insert holds its color indefinitely and resists scratching from daily contact.
Titanium Seamaster references attract a specific audience: those who wear their dive watches daily and prioritize comfort over flash. The weight reduction from the steel version is immediately obvious on the wrist. Where the standard 210.30 steel model catches light with its polished flanks, this reference stays subdued. The omega seamaster diver 300m ceramic combination between case and bezel creates a tonal uniformity that steel-and-ceramic variants do not achieve. For a broader view of the full dive watch range, explore the Seamaster lineup. Within that range, the 44mm chronograph edition takes the opposite approach with a larger, bolder case.
The steel 210.30 is the volume seller. The sedna gold 210.60 targets dressy wrists. This titanium 210.90 sits between them as the lightest and most utilitarian option. If weight sensitivity matters to you, no other current Seamaster 300M reference delivers the same level of wrist comfort. The matte texture, scratch-proof bezel, and reduced mass make it the most field-ready configuration in the catalog. This replica Seamaster 210904 1003 captures that lightweight, all-ceramic-and-titanium identity in full detail.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$249.00 – $849.00Price range: $249.00 through $849.00
$299.00 – $1,159.00Price range: $299.00 through $1,159.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.