$749.00
$749.00
This replica Big Bang 1171 delivers the Unico chronograph in a titanium case without diamond embellishments, presenting the skeletonized movement architecture in its most technically focused form. The 441.NX.1171.RX uses the same fundamental case construction as diamond-set variants but strips away the stones, leaving brushed titanium surfaces and the signature six H-shaped bezel screws fully exposed. Hublot positioned this reference as the entry into the modern Unico family, where the movement visibility and chronograph function take center stage.
Titanium offers the best strength-to-weight ratio in the Big Bang material roster. Satin-finishing across the case and bezel creates a uniform matte surface that resists fingerprints better than polished alternatives.
The Unico architecture places its column wheel on the dial side, making the chronograph mechanism part of the visual experience rather than hiding it behind a caseback. Through the skeletonized openings, the coupling lever, reset hammer, and column wheel teeth are all visible during operation. The flyback function allows instant chronograph restart without cycling through stop-reset-start, a complication that adds practical value for sequential timing. The Sang Bleu II 418.EX.5107.RX wraps a similar movement in geometric Sang Bleu case architecture for a dramatically different visual outcome. The full Big Bang catalog shows how the same caliber platform adapts across dozens of material and design combinations.
Without diamonds, ceramic, or precious metals drawing the eye, the titanium 1171 puts focus squarely on mechanical content. The movement fills the dial opening, and the chronograph operation becomes the primary visual event on the wrist. Titanium wears lighter than steel and significantly lighter than gold, making full-day wear comfortable even at this case diameter. The neutral grey tone of satin titanium pairs equally well with rubber, leather, or textile straps if you choose to swap. This replica Big Bang 1171 represents the Unico concept reduced to its essentials, mechanical spectacle in a case material that prioritizes wearability over opulence.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$249.00 – $849.00Price range: $249.00 through $849.00
$639.00 – $1,499.00Price range: $639.00 through $1,499.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.