$599.00
$599.00
The WGPA0014 reference places this replica Pasha GPA0014 gold in a 35mm rose gold case that hits the middle ground between the 30mm ladies variant and the larger 41mm men’s version. A silvered dial with luminous Arabic numerals at all four cardinal positions gives the watch a balanced, readable layout. The 35mm diameter works on a range of wrist sizes without leaning too far toward either end of the size spectrum, which is exactly where Cartier positioned this reference in the current Pasha lineup.
The luminous fill on the Arabic numerals is a practical touch that separates the Pasha from dress-oriented models. It adds low-light readability without compromising the overall elegance of the dial design.
Rose gold finishing covers the case, crown guard, and bracelet links, creating a monochromatic look that reads as jewelry-forward. The chain-linked crown cap, a Pasha signature since the collection debuted in 1985, sits flush against the case at 3 o’clock when not in use. The bracelet alternates polished and satin-brushed links in a pattern that catches light differently depending on angle. Side by side with the 30mm W2PA0007 silver version, the 35mm feels noticeably more substantial on the wrist while maintaining the same warm gold tone. Both belong to the Pasha collection, but the five extra millimeters shift this piece toward a unisex presence rather than a strictly ladies fit.
At 35mm the WGPA0014 sits comfortably under a shirt cuff and carries enough visual mass to work as a standalone accessory on a bare wrist. The rose gold tone pairs naturally with brown and tan leather straps if you choose to swap the bracelet, though the stock metal bracelet already delivers a fully finished look. The date window at 3 o’clock keeps things practical, and the screw-down crown adds a layer of water resistance you would not expect from a dress-leaning watch. This replica Pasha GPA0014 gold captures the mid-size sweet spot in a collection built around round cases and distinctive crown hardware.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$678.00 – $1,499.00Price range: $678.00 through $1,499.00
$249.00 – $849.00Price range: $249.00 through $849.00
$659.00 – $1,099.00Price range: $659.00 through $1,099.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.