$659.00
$659.00
Anchored by a blackened steel case and matching leather strap, this replica avenger sb01472a black presents the Avenger platform in a fully stealth configuration. The SB01472A1B1X1 reference uses DLC-coated stainless steel at 45mm with a chronograph movement and a black dial that makes subdials and numerals emerge only under direct light. Breitling built this variant for maximum visual impact with minimum color variance, and every surface detail from the coated crown guards to the blackened pushers reinforces that commitment to a single-tone aesthetic.
DLC coating creates a harder surface than paint or PVD, resisting desk-diving scratches that normally reveal bare steel within months on coated watches. The matte-to-satin gradient across the case adds subtle dimension despite the monochromatic palette.
The chronograph module adds elapsed-time measurement to the standard automatic base, with pushers at two and four o’clock. On a black case, those pushers blend into the profile rather than punctuating it the way polished steel pushers do on standard Avengers. The folding clasp on the leather strap sits nearly flush against the underside, avoiding the bulk that deployment clasps on rubber straps can sometimes create. For contrast, set this against the A13381111B uncoated leather Avenger, which shares the 45mm chronograph layout in bare steel. The full range sits within the Avenger collection.
All-black watches sacrifice some legibility for visual cohesion, and this Avenger is no exception. Under low light, you read it by lume plots rather than printed markers. That trade-off appeals to a specific buyer who prioritizes the monochrome look over instant glanceability. The leather strap softens the tactical mood compared to the textile-strap black Avengers and makes the watch more appropriate with a dark blazer or leather jacket. This replica avenger sb01472a black delivers the stealth formula on leather for wrists that want the blacked-out Avenger without the military-issue strap.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$1,099.00 Original price was: $1,099.00.$1,049.00Current price is: $1,049.00.
$249.00 – $1,149.00Price range: $249.00 through $1,149.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.