$1,099.00
$1,099.00
This replica Royal-Oak-Offshore 15707CB white stands out immediately through its color combination: a white dial set inside a 42mm ceramic case with the reference 15707CB.OO.A010CA.01. The white-on-ceramic pairing creates a high-contrast look that separates it from the predominantly dark-dialed Offshore catalog. Audemars Piguet has used white dials sparingly in the Offshore line, making references like the 15707CB uncommon enough to draw attention at any gathering of sport watch enthusiasts.
The contrast between the dark ceramic case and bright white dial gives the 15707CB a tuxedo-like quality. Applied hour markers and hands use luminous material that glows green in low light, adding functionality without cluttering the clean dial layout.
White-dial Offshore models occupy a niche position between the all-black stealth divers and the colorful limited editions. The 15707CB uses that middle ground effectively: the ceramic case provides the same scratch resistance and weight reduction as any ceramic Offshore, while the white dial keeps it visually lighter. Inside, the automatic movement handles time and date without chronograph complications. The 44mm Forest Green reference shows how a colored dial changes the entire personality of the same watch family. Browse the full Offshore collection to see every current dial option side by side.
Ceramic at 42mm wears comfortably for most wrist sizes, and the reduced weight compared to steel means you notice it less during a full day. The white dial catches light differently than dark versions, reflecting rather than absorbing, which makes the watch more visible on the wrist. That visibility is either a benefit or a drawback depending on personal preference, but it undeniably gives the 15707CB a distinct character within a lineup dominated by black and grey options. For those who want an Offshore diver that breaks the monochrome pattern, this replica Royal-Oak-Offshore 15707CB white is the direct answer.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$666.00 – $1,499.00Price range: $666.00 through $1,499.00
$249.00 – $849.00Price range: $249.00 through $849.00
$249.00 – $1,159.00Price range: $249.00 through $1,159.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.