$626.00 – $1,499.00Price range: $626.00 through $1,499.00
$626.00 – $1,499.00Price range: $626.00 through $1,499.00
Encased in black ceramic, this replica rm-055 black case pairs the lightest wearable ceramic with the RM 055’s already featherweight tonneau design. The V2 revision keeps the same skeleton dial layout found across the entire 055 range while adding the scratch-resistant properties of ceramic to the exterior. Richard Mille has long favored ceramic for its combination of low density and extreme surface hardness, and on the 055 platform those properties amplify the watch’s core identity as an ultra-light tool piece. The black finish absorbs light rather than reflecting it, giving the case a stealth quality that contrasts with the exposed movement visible through the dial.
Ceramic density runs lower than titanium and significantly lower than steel, which means the black ceramic RM 055 barely registers on the wrist despite its visual size.
Beneath the sapphire crystal, the manual wind movement shows its bridge layout in full. The dark ceramic case serves as a neutral frame, so the eye focuses on movement finishing rather than case reflections. Bridge surfaces alternate between matte and polished, and the barrel at twelve o’clock provides a visual anchor at the top of the dial. Placed alongside the standard composite V2, the ceramic version adds material prestige and scratch resistance to an otherwise identical package. Both belong to the RM 055 lineup, sharing the same movement and dial configuration.
Black ceramic eliminates the micro-scratches that accumulate on composite and metal cases over months of daily wear. That means this version looks newer for longer without polishing or refinishing. The trade-off is cost and brittleness under sharp point impact, though normal wrist wear presents no structural risk. This replica rm-055 black case is the material upgrade for anyone committed to wearing their 055 every day without visible wear marks.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$690.00 – $1,799.00Price range: $690.00 through $1,799.00
$299.00 – $899.00Price range: $299.00 through $899.00
$676.00 – $1,499.00Price range: $676.00 through $1,499.00
$299.00 – $1,299.00Price range: $299.00 through $1,299.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.