$749.00
$749.00
This replica classic fusion 0170 black pairs a ceramic case with Hublot’s Aerofusion skeleton chronograph architecture in reference 525.CM.0170.RX. The “CM” in the reference designates ceramic material throughout, giving the entire case a lightweight, scratch-resistant surface that standard steel cannot match. At 45mm the Aerofusion sits in the larger segment of the Classic Fusion family, balancing the visual openness of a skeletonized dial against the dark, monochromatic ceramic construction. The black dial treatment lets the chronograph bridges and movement architecture show through without overwhelming the readability of the time display.
Ceramic as a case material brings the weight down noticeably compared to steel or gold versions in the same 45mm diameter. The surface also resists hairline scratches from daily wear, maintaining its factory finish longer than metallic alternatives.
The Aerofusion concept strips away the solid dial plate to expose the chronograph mechanism underneath. On this black ceramic version, the exposed bridges and plates are finished in dark tones that blend with the case, creating a stealth aesthetic where movement and case merge visually. The classic fusion chronograph titanium models in the same 525 series use a silver-toned approach instead. For a gold-cased take on the Classic Fusion chronograph, consider the 521.CO.1781.RX in gold with carbon dial. Both share the same Classic Fusion collection DNA but target opposite ends of the color spectrum.
The 45mm ceramic case wears lighter than its diameter suggests. Ceramic density sits below steel, so despite the generous proportions the watch does not pull or slide on the wrist. The rubber strap complements the all-black approach, and the deployant clasp keeps the profile low against the skin. This replica classic fusion 0170 black delivers the Aerofusion skeleton concept in its most understated material configuration.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$645.00 – $1,499.00Price range: $645.00 through $1,499.00
$249.00 – $849.00Price range: $249.00 through $849.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.