$659.00
$659.00
This replica navitimer ab0138241c blue carries the full-size 43mm case that defines the modern Navitimer B01 chronograph line. The sunburst blue dial sits behind the signature circular slide rule bezel, delivering the aviation-calculator function that has been part of the Navitimer identity since 1952. At 43mm on a stainless steel bracelet with folding clasp, the AB0138241C1A1 wears noticeably larger than the 41mm variants, which matters if you prefer a chronograph that fills the wrist without feeling like an oversized dress watch.
The blue dial on this reference shifts between deep navy in shade and a brighter cobalt under direct light. Silver-toned registers at 3, 6, and 9 maintain strong contrast against the blue surface, keeping the sub-dials legible even on a busy Navitimer face.
Breitling positions the B01 movement as its in-house chronograph caliber, offering a column-wheel mechanism and approximately 70 hours of power reserve. The vertical clutch design means the chronograph seconds hand starts without the stutter common in lateral-clutch movements. For those comparing within the range, the AB0121211B1A1 black dial variant shares the same 43mm case and caliber but swaps the blue for a high-contrast black layout. Both sit within the Navitimer collection, yet the blue version reads more casual, while the black leans toward instrument-panel clarity.
The 43mm blue Navitimer occupies a specific lane: large enough to be immediately recognizable on the wrist, colorful enough to work with weekend wear, and technical enough to satisfy anyone who values a column-wheel chronograph. Breitling has offered blue-dial Navitimers before, but the B01 platform with its longer power reserve and modern bracelet finishing makes this generation the most refined. This replica navitimer ab0138241c blue puts the full aviation-chronograph experience in reach without the wait list that sometimes follows limited Breitling references.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$249.00 – $849.00Price range: $249.00 through $849.00
$249.00 – $849.00Price range: $249.00 through $849.00
$299.00 – $1,159.00Price range: $299.00 through $1,159.00
$249.00 – $1,159.00Price range: $249.00 through $1,159.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.