$1,099.00
$1,099.00
This replica Royal-Oak-Offshore 15720CN black is built around the 15720CN.OO.A002CA.01 reference, a 42mm diver rendered entirely in ceramic. The material choice transforms the Offshore from a stainless steel sport watch into something lighter, scratch-resistant, and visually distinct. Audemars Piguet introduced ceramic Offshore references to address buyers who wanted the signature octagonal design without the weight and surface vulnerability of metal cases.
Ceramic cases weigh roughly 30% less than their steel equivalents at the same dimensions. That difference is immediately noticeable when you pick up the 15720CN next to a steel 15720ST. The material also resists scratches far better than brushed steel, keeping the case surfaces cleaner over extended wear.
The automatic movement provides time and date without additional complications, matching the diver-focused purpose of the 15720 reference family. The date window sits at 3 o’clock with a color-matched date disc that maintains the monochrome aesthetic. Crown operation follows the standard screw-down protocol for the Offshore diver series. For a steel alternative within the same reference family, compare this against the 44mm Forest Green steel diver. Both are accessible through the Offshore collection page.
The ceramic 15720CN sits at the intersection of material technology and sport watch design. Where steel Offshore references show brushed and polished surfaces, ceramic presents a uniform matte black texture that absorbs light rather than reflecting it. The visual result is a watch that looks smaller on wrist than its 42mm measurement, because the dark surface minimizes perceived volume. Paired with the rubber strap, total weight stays low enough for all-day wear without fatigue. If you prioritize lightweight construction and scratch resistance, this replica Royal-Oak-Offshore 15720CN black addresses both requirements in a single reference.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$653.00 – $1,499.00Price range: $653.00 through $1,499.00
$589.00 – $949.00Price range: $589.00 through $949.00
$249.00 – $949.00Price range: $249.00 through $949.00
$638.00 – $1,499.00Price range: $638.00 through $1,499.00
$299.00 – $999.00Price range: $299.00 through $999.00
$639.00 – $1,799.00Price range: $639.00 through $1,799.00
WhatsApp us
Superclone-grade replica watches. Swiss movements, 904L steel, sapphire crystal. Every piece QC'd before shipping.
Exclusive deals and new arrivals. No spam — just watches.