Omega’s 311.32.40.30.02.001 reference delivers a classic panda dial layout on a reduced 40mm Speedmaster case, making this replica speedmaster 311324 panda one of the more compact chronographs in the current range. The “panda” designation comes from the white dial with black subdial registers, a color scheme that has been a collector favorite across watch brands for decades. At 40mm, this reference sits closer to the vintage Speedmaster proportions than the 42mm Moonwatch or 44mm Racing variants, giving it a noticeably different wrist presence.

Key Specifications

• Case diameter: 40mm
• Case material: stainless steel
• Dial: white (“panda”) with black subdial registers
• Bezel: steel tachymeter
• Crystal: sapphire
• Bracelet: stainless steel
• Movement: manual-wind chronograph (Cal. 1861 clone)
• Functions: chronograph, small seconds, 30-minute counter, 12-hour counter

The panda configuration creates maximum contrast across the dial face. Black registers against white give each subdial its own visual identity, which makes reading elapsed time faster at a glance than monochrome layouts allow. Reproducing that contrast cleanly is the hardest part of any Speedmaster panda superclone.

Design & Finishing

The 40mm case diameter is significant. It places this speedmaster panda dial in the territory that most wrists can wear comfortably without the chronograph dominating the overall look. The steel bracelet uses the tapered profile found across the Speedmaster range, narrowing from the lugs to the clasp. Brushed surfaces on the outer links and polished center links create the expected mix of textures. For a limited-edition take on the Speedmaster at a similar size, the Snoopy 42mm edition adds a commemorative twist. The broader Speedmaster collection covers everything from these smaller chronographs to full-size 44mm racing models.

On the Wrist

Panda dials photograph exceptionally well because the contrast translates directly through a camera lens. On the wrist, the white face catches light and gives the watch a presence that belies the 40mm size. Buyers who find 42mm and 44mm Speedmasters too large will appreciate the proportional tightness here. This replica speedmaster 311324 panda puts that high-contrast chronograph aesthetic into a package that works for smaller wrists and dressier occasions.

OM Factory Execution

OM Factory produces the most accurate replica Speedmaster Panda Dial for this reference. The 40.30.02.001 requires precise subdial finishing—OM achieves the contrast between white dial and black subdials that defines the panda aesthetic.

Movement Specifications

• Caliber: manual-wind chronograph (Cal. 1861 clone)
• Power reserve: 48 hours
• Frequency: 21,600 vph
• Functions: chronograph seconds, 30-minute counter, 12-hour counter
• Classic Speedmaster proportions

Water Resistance

50 meters water resistance suits daily wear. Avoid swimming or water immersion.

Frequently Asked Questions

What is a panda dial Speedmaster?

Panda dial refers to white main dial with black subdials—resembling a pandas face pattern. The 311.32.40.30.02.001 inverts the standard black-on-black Speedmaster color scheme.

Which factory makes the best Speedmaster Panda clone?

OM Factory. On a panda layout the dial is the whole watch: the white base has to stay neutral instead of drifting cream, and the three subdial rings have to sit at a single depth. OM is the only factory we have seen hold both on the 40mm case.

What size is the Speedmaster Chronograph 40.30.02.001?

40mm diameter—smaller than standard 42mm Moonwatch Professional, creating a vintage-proportioned wearing experience.

Is the panda dial Speedmaster replica manual wind?

Yes. The Cal. 1861 clone is hand-wound rather than automatic, and a full wind gives roughly 48 hours — the same daily ritual as the Moonwatch this movement descends from.